Nascent Fittings Inc.·Carbon Steel
Carbon Steel 180° Elbow
ASME B16.9 buttweld elbows, tees, reducers & caps in SS, CS, alloy, duplex & nickel alloys. Sch 10–XXS, MTCs, inspection support and worldwide export supply.
- Material
- Carbon Steel
- Size
- 1/2" to 80" NB
- Schedule
- Sch 10/20/40/XS/60/80/100/120/140/160/XXS
- Grades
- ASTM A234 WPB, P235TR2, P265TR2 +
About
Carbon Steel Buttweld Fittings
Product overview combined with Carbon Steel material context for project selection.
Nascent fittings is a reputed manufacturer and exporter of a wide range of Buttweld fittings which are used in industrial pipe systems to change direction, branching and to mechanically connect equipments to the system including high temperature conditions like furnace.
Manufacturing note
Is a pipe fitting which is widely used as a connection point between two lengths of pipes to produce a change in the direction of flow in the pipe, usually at an angle of 180 degree. Elbows are also commonly referred to as bends, and are available in a range of materials such as nickel alloys, stainless steel, alloy steel, carbon steel, duplex, super duplex, etc. Long Radius 180-degree return bend allows complete reversal of flow. 180 Degree Elbow permits the direction of pipes to be reversed by 180 Degrees, which results mainly in low pressure. 180 Degree Elbow are precise in their characteristics. Nascent fittings INC manufactures 180 Degree Elbow in a variety of grade standards, sizes and materials to meet specific application needs. The professionals and workers work exceptionally accurately to produce Elbows of premium quality.
Typical applications
- Oil & Gas
- Petrochemical
- Chemical Processing
- Power Generation
- Refineries
- Pressure Vessels
Technical data
180° Elbow specifications
Specifications
CARBON STEEL SPECIFICATIONS:
- Size : 1/2" to 24"NB , ANSI/ASME B 16.9
- Schedule : 10/20/40/80/100/120/160/XXS
- Carbon Steel : ASTM A 234 WPB, IS 1239 PART II
- Carbon Steel : DIN Standard – EN 10253-2 – P235TR2/P265TR2/P235GH/P265GH/P355N/P355NH
- Other Services: Hot Dip Galvanizing, Sand Blasting, Coating – FBE/3LPE/PTFE
ALLOY STEEL, & LTCS SPECIFICATIONS:
- Alloy Steel : ASTM A 234, WP5, WP9, WP11, WP12, WP91
- Low Temp. CS : ASTM A-420 WPL6
- Other Services: Hot Dip Galvanizing, Sand Blasting, Coating – FBE/3LPE/PTFE
STAINLESS STEEL SPECIFICATIONS:
- Size : 1/2" to 24"NB, ANSI/ASME B 16.9
- Schedule : 10/20/40/80/100/120/160/XXS
- Stainless Steel : ASTM A 403 WP – TP 304/304H/304L/316/316H/316L/316Ti/309/310/317L/321/347/904L / XM19
- Stainless Steel : DIN Standard EN 10253-4 / 10222-5 1.4301/1.4307/1.4401/1.4404/1.4529/1.4571/1.4541/1.4410/1.4550/1.4335/1.4539
DUPLEX STEEL & COPPER NICKEL SPECIFICATIONS:
- Size : 1/2" to 12"NB , ANSI/ASME B 16.9
- Schedule :10/20/40/80/100/120/160/XXS
- Duplex Steel : ASTM A815- UNS S31803, S32205, S32750, S32760
- Copper Nickel : C70600(90:10), C71500(70:30), C71640
NICKEL ALLOYS SPECIFICATIONS:
- Size : 1/2" to 12"NB , ANSI/ASME B 16.9
- Schedule :10/20/40/80/100/120/160/XXS
- Nickel : UNS N02200, N02201
- Monel : UNS N04400, N05500, Alloy 20
- Inconel : UNS N06600, N06601, N006625, N08800, N08810, N08825
- Hastelloy : UNS N10276, N06022, N10665, N06455
- SMO 254 Grade UNS S31254
- Aluminum – ASTM / ASME SB361 – 3003 H18 , 3003 H112, 6061 T6, 6063 T6, 6351 T5, 6351 T6
- Titanium – ASTM / ASME SB363 – Gr1, Gr2, Gr5, Gr7, G9, Gr12, Gr23
Carbon Steel grades
Available grades for Buttweld Fittings
Drawn from the Carbon Steel catalog and this product’s material specification.
ASTM A234 WPB
Standard carbon steel buttweld fitting grade for moderate and elevated temperature service.
Best for · General buttweld piping
P235TR2
EN carbon steel grade for welded tubes for pressure purposes with specified elevated temperature properties.
Best for · Pressure tubing
P265TR2
Higher-strength EN carbon steel for welded pressure tubes.
Best for · Higher pressure tube service
P235GH
EN non-alloy steel for elevated temperature pressure vessels and pipe.
Best for · Elevated temperature pressure service
P265GH
EN non-alloy steel with higher yield for elevated temperature pressure equipment.
Best for · Higher-duty pressure vessels
P355N
Normalized fine-grain EN carbon-manganese steel for pressure vessels.
Best for · Normalized pressure vessel service
P355NH
Elevated-temperature variant of P355 for pressure applications.
Best for · Elevated temperature pressure vessels
Also available in
Other materials for this product
View Buttweld Fittings in another material grade family.
Scroll →
Material
Duplex Steel
UNS S31803 · UNS S32205
View
Material
Low Temperature Carbon Steel
ASTM A420 WPL6
View
Material
Cupro Nickel
Cu-Ni 90/10 (C70600) · Cu-Ni 70/30 (C71500)
View
Material
Nickel Alloy
Nickel 200 · Nickel 201
View
Material
Monel
Monel 400 · Monel K500
View
Material
Hastelloy
Hastelloy C-276 · Hastelloy C-22
View
Material
Aluminium
3003-H18 · 3003-H112
View
Material
Titanium
Grade 1 · Grade 2
View
Material
Stainless Steel
SMO 254 · F304
View
Material
Alloy Steel
F5 · F9
View
Material
Copper
C11000 (ETP) · C12200 (DHP)
View
Material
Copper Alloy
UNS C70600 (Cu-Ni 90/10) · UNS C71500 (Cu-Ni 70/30)
ViewConfigurations
Carbon Steel Buttweld Fittings types
Open a type for drawings-aligned specifications.
Carbon Steel Cross Tee
Carbon Steel Laterals
Carbon Steel End Cap
Carbon Steel U Bend
Carbon Steel Short Stubend
Carbon Steel Long Stubend
Carbon Steel Barred Nipples
Carbon Steel Swage Nipples
Carbon Steel Reducers
Carbon Steel Reducing Tee
Carbon Steel Barred Tee
Carbon Steel Equal Tee
Carbon Steel 180° Elbow
Carbon Steel 90° Elbow
Carbon Steel 45° Elbow
Compliance
Standards & certificates
Specifications and documentation support typically referenced for this product line.
Standards
7- 01ASME B 16.9
- 02MSS-SP-43
- 03MSS-SP-75
- 04MSS-SP-97
- 05MSS-SP-95
- 06ASTM A105
- 07ASTM A694
Certificates
5- EN 10204 3.1
- ISO 9001
- PED
- IBR
- NACE MR0175
Manufacturing
Crafted with care
Workshop and production views for Carbon Steel 180° Elbow — the same craftsmanship photos from our plant archives, shown in webp.
4 photos
People also ask
Questions about Buttweld Fittings
Nascent Fittings Inc. answers common buyer questions for this line.
Does Nascent Fittings Inc. manufacture Buttweld Fittings?+
Yes. Nascent Fittings Inc. manufactures and supplies Buttweld Fittings for industrial piping projects, with material grades and sizes aligned to project specifications.
Can Nascent Fittings Inc. export Buttweld Fittings worldwide?+
Yes. We export Buttweld Fittings globally with standard export packaging, material test certificates, and documentation support for international shipments.
What materials are available for Buttweld Fittings?+
Buttweld Fittings is available in carbon steel, alloy steel, stainless steel, duplex, nickel alloys, copper alloys, aluminium, titanium and other project-specific materials as required.
Need pricing for Carbon Steel 180° Elbow?
Share sizes, material grade and quantity — manufacturing options and delivery timelines follow.
